PrimaGARD ® Standard Non Rated
AU$25.00 ex GST
This range of PrimaGARD® standard non rated masks are suitable for situations where there is no risk of exposure to blood or body fluid splash.
|
REORDER |
DESCRIPTION |
PCS/ UNIT |
UNITS/ CTN |
|
PG4-1680 |
Child Face Mask Dinosaur Print Earloop |
50 |
10 |
|
PG4-2320 |
Surgical Light & Cool Green Tieback |
50 |
6 |
Construction
Material
Outer -Polyspun bond polypropylene for PG4-2320 masks
-Cellulose for PG-41680
Filter - Melt blown polypropylene
Inner -Cellulose for PG4-320 mask
-Proprietary non woven material for PG4-1680
Piping -Spunlace (viscose/PET) top and bottom
Welding - All seams ultrasonically welded
Nose Piece - Aluminium alloy strip
-13.6 x 0.3 cm – PG4-2320
- 10.5x 0.3 cm – PG4-1680
Ties & Polyspun bond Polypropylene -44cm top, 38cm bottom length
Ear Loop -Spandex/polyester, rounded type, ultraso nically welded to outer side -≤ 9.5cm free length
ALL MASKS -are glass and latex free and passskin sensitivity test.
- non-linting materials are smooth and comfortable to eliminate skin irritation
SPECIFICATION
PG4-2320 PG4-1680
Bacterial Filtration Efficiency (BFE) at 3.0 μm
& >98% > 95%
Particle Filtration Efficiency (PFE) at 0.1 μm
& >98% Not applicable
Delta P (Differential Pressure) H2O/cm2
& <1.9 < 2.7
Resistance to penetration by synthetic blood & Not rated Not rated
Dimension & 18.0 x 9.3 cm 14 x 8.0 cm
EN14683 classification & Type II Type I
Compliance standard & AS4381:2002, ISO 10993&1:2009
Flammability & Class 1
ARTG No. & 212197
Labeling
Primagard range of masks are available in easy to handle dispenser boxes. The box top cover has serrated marking which allows dispensing of the masks by pulling out from the top. The product description, re&order code and product information such as lot number, quantity, country of manufacture and other relevant characteristics are printed on the box.Dispenser boxes are further packed into shippers which are labelled with product name, product description, reorder code, storage instructions, country of manufacture,quantity, shipper gross weight and dimensions.
Recommended Storage
Store in clean, dry environment away from direct sunlight.Packaging
Masks are packed in inner boxes which are further packed in shippers to hold the following quantities.
PG4&2320 – 50 pieces x 6 units PG4&1680 – 50 pieces x 10 units
Instruction of Use
To achieve maximum benefit it is important that the mask is worn properly. Place mask over the mouth and by pulling, extend it to below the chin and over the nose. Press to mould the nose piece of the mask to properly secure it around and over the nose. It should not kink or break when adjusted. For masks with ear loop, pull and place loops over the ears. For masks with ties, the upper tie should be tied at the crown of the head and the lower tie should be tied behind the neck to hold the sides of the mask against the face to prevent any gaping.As part of personal protective equipment, a face mask is considered to be contaminated once it has been used, and should be discarded immediately. Remove the mask by the edges or the ties rather than the front panel.
2017 © kc2 Health Supplies. ALL Rights Reserved. Warranty & Return Policy |Privacy Policy | Terms of Service